HWHomeEnergyCalcs

Methodology & Data Sources

HomeEnergyCalcs provides transparent, non-gated energy operating cost estimates so US households can model real-world numbers without submitting personal contact information.

1. EV Charging Cost Formula

Electric vehicles consume electricity from the wall outlet rather than strictly what enters the battery pack. Level 2 AC home charging typically achieves around 88% to 92% wall-to-battery efficiency. Our calculator applies a conservative 90% charging efficiency factor by default:

Annual Grid Electricity (kWh) = (Annual Miles / EV Efficiency [mi/kWh]) / 0.90
Home Charging Cost ($)       = Annual Grid Electricity × (Home Rate [¢/kWh] / 100)
Gasoline Cost ($)            = (Annual Miles / Gas Vehicle MPG) × Gas Price ($/gal)

2. Blended Home & Public Charging

Most US EV households charge 80% to 90% of annual miles at home and rely on public DC fast chargers (DCFC) during road trips. The default split is set to 85% home / 15% public and can be adjusted anywhere from 0% to 100%.

3. Baseline State Rates & Benchmarks

  • Electricity Pricing: U.S. EIA Official Retail Electricity Data (2026-08) & DOE/AFDC Benchmarks (2026-08-EIA-v2), with a US national baseline of 18.2¢/kWh.
  • Important Local Variance: Utility tariffs vary within each state depending on investor-owned utilities, municipal providers, tiered usage, and optional EV Time-of-Use (TOU) off-peak plans. Enter your exact bill rate in the calculator input for maximum accuracy.
  • Tax Credits & Rebates Policy: Because federal residential energy and EV tax incentives change by legislation (including recent 2025/2026 sunsets), our calculators focus on direct energy operating savings and never assume expired federal tax credits automatically.

4. Heat Pump vs. Natural Gas Furnace Formula

Residential heating fuels are standardized by delivered heat in MMBtu (1 MMBtu = 1,000,000 BTU), where 1 therm of natural gas equals 100,000 BTU and 1 kWh of electricity equals 3,412 BTU. Heat pump efficiency is modeled via HSPF2 (BTU/Wh), with seasonal COP = HSPF2 / 3.412:

Heat Pump Electricity (kWh) = Delivered Heating BTU / (HSPF2 × 1,000)
Gas Furnace Fuel (therms)   = (Delivered Heating BTU / AFUE) / 100,000
Break-Even HSPF2            = (100 × Electricity [$/kWh] × AFUE) / Gas [$/therm]
Break-Even Seasonal COP     = Break-Even HSPF2 / 3.412

5. Residential Solar Payback & NREL Peak Sun-Hours Formula

Solar generation combines system DC nameplate capacity (kW) with state average daily peak sun-hours from NREL PVWatts benchmarks and an industry-standard 80% DC-to-AC performance ratio. Multi-year 25-year savings factor in 0.5%/yr panel degradation and 2.5%/yr retail electricity rate inflation:

Year-1 Solar Output (kWh)    = System Size (kW) × Peak Sun Hours × 365 × 0.80
Net Installed Cost ($)       = (System Size [kW] × 1,000 × $/Watt) × (1 - Incentive %)
Simple Payback (Years)       = Net Installed Cost / (Year-1 Output × Retail Rate [$/kWh])
25-Yr Solar LCOE (¢/kWh)     = (Net Installed Cost / 25-Yr Degraded kWh Total) × 100