Heat Pump vs. Gas Furnace Operating Cost in Texas
Texas's baseline residential natural gas rate is $1.58/therm (7% above the US average), compared with 15.9¢/kWh for residential electricity. Enter your utility rates and home heating load below to model your exact winter operating costs.
TX Electricity & Gas
15.9¢ · $1.58
¢/kWh vs. $/therm residential rate
Cost per Delivered MMBtu
$16.75 vs. $18.59
Heat pump (9.5 HSPF2) vs. 85% gas
Break-Even Efficiency
COP 2.51
Equal to 8.6 HSPF2 vs. 85% AFUE
Est. Annual Savings vs. Gas
+$33/yr
Saves $538/yr vs. resistance
Interactive Heat Pump vs. Gas Furnace Calculator — Texas
Pre-loaded with Texas residential utility rates (15.9¢/kWh & $1.58/therm) and hot climate heating demand.
TX baseline: 15.9¢/kWh
TX residential baseline: $1.58/therm
Heat Pump Annual Operating Savings vs. Gas
+$33 / yr saved
Vs. electric baseboard resistance heating, a heat pump saves +$538/yr ($2,688 over 5 years).
Winter Heat Pump / mo
$60/mo
Winter Gas / mo
$67/mo
5-Yr vs. Gas
+$167
Annual Heating Fuel Cost Comparison (18 MMBtu Delivered)
Heat Pump / MMBtu
$16.74
Gas / MMBtu
$18.59
Break-Even HSPF2
8.6
Break-Even COP
2.51
Estimated annual usage: 1,895 kWh (Heat Pump) vs. 212 therms (Gas Furnace). Operating cost excludes fixed utility meter fees and installation costs.
Texas Annual Heating Cost by Home Size (hot climate)
Compares a cold-climate 9.5 HSPF2 air-source heat pump, an 85% AFUE natural gas furnace, and 1.0 COP electric resistance heating at Texas's baseline rates.
| Home Size & Load | Heat Pump (9.5 HSPF2) | Gas Furnace (85% AFUE) | Electric Baseboard | Heat Pump vs. Gas |
|---|---|---|---|---|
| Small Home / Condo (1,400 sq ft) (13 MMBtu) | $218/yr | $242/yr | $606/yr | +$24/yr saved |
| Typical Home (2,000 sq ft) (18 MMBtu) | $301/yr | $335/yr | $839/yr | +$33/yr saved |
| Large Home (2,800 sq ft) (25 MMBtu) | $419/yr | $465/yr | $1,166/yr | +$46/yr saved |
Reference dataset: U.S. EIA Official Retail Electricity Data (2026-08) & DOE/AFDC Benchmarks (2026-08-EIA-v2). View thermodynamic formulas and assumptions.
Climate & Dual-Fuel Insights for Texas
Warm-climate states have mild heating loads where heat pumps operate near peak COP (3.2–4.0) all winter long. Upgrading to a modern heat pump simultaneously boosts summer cooling SEER2 efficiency without paying fixed monthly natural gas meter charges year-round.
Note: Homeowners switching away from gas entirely also eliminate year-round fixed monthly gas utility connection fees ($15–$30/mo in many markets), which adds $180–$360 in annual savings not included in fuel-only operating figures above.
More Texas Energy Tools
Charging an Electric Car at Home in Texas?
Compare 15.9¢/kWh overnight home EV charging against $2.89/gal gasoline.
Frequently Asked Questions — Texas Heat Pumps
Is a heat pump cheaper to run than a gas furnace in Texas?
Yes, at Texas's baseline rates (15.9¢/kWh and $1.58/therm), an ENERGY STAR 9.5 HSPF2 heat pump saves roughly $33/year compared with an 85% AFUE gas furnace for a typical 18 MMBtu home.
What heat pump efficiency (COP / HSPF2) breaks even with natural gas in Texas?
Using Texas's baseline residential utility rates and an 85% AFUE reference furnace, the fuel-cost break-even point is 8.6 HSPF2 (seasonal COP of 2.51). Whenever your heat pump operates above COP 2.51, it costs less per BTU delivered than burning natural gas.
How much does a heat pump save over electric baseboard heat in Texas?
Switching from 100%-efficient (1.0 COP) electric baseboard or resistance furnace heat to a 9.5 HSPF2 (2.78 COP) heat pump reduces heating electricity usage by roughly 64%, saving an estimated $538/year ($2,689 over 5 years) at Texas's 15.9¢/kWh rate.